定温乾燥機 - Yamato

- Method : Natural gravity convection

- Operating temp. range : Room temp.＋5～260℃

- Temp. control accuracy : ±1℃（at 260℃）

- Temp. distribution accuracy : ±5℃（at 260℃）

- Max. temp. reaching time : Approx. 75 min.

- Interior material : Stainless steel

- Exterior material : Electrogalvanized steel sheet paint

- Heat insulating material : Glass wool

- Heater : Stainless pipe heater

- Heater : 1.2kW

- Observation window : 250×280 mm Chemically strengthened glass×3

- Cable hole : 30 mm l.D.×1 pcs.(right side)

- Exhaust port : 30 mm l.D.×2 pcs.(on top)

- Temp. controller : P.I.D. control

- Temp. setting method : Digital setting method using the dedicated operation menu key and ▲ ▼ key

- Temp display method : Measurement temperature display: Green LED digital display (resolution: 1 ° C) Set temperature display: Red LED digital display (resolution: 1 ° C)

- Timer : 0 minutes to 99 hours 59 minutes and 100 to 999 hours 50 minutes (timer weight function, ON / OFF possible)

- Operation function : Fixed value operation, program operation, quick auto stop, auto stop, auto start, program auto start

- Program mode : Program operation 6 pattern selection (30 steps x 1, 15 steps x 2, 10 steps x 3), step weight function, step hold function, step skip function

- Additional functions : Calibration offset function, key lock function, power failure recovery mode selection function, pattern repeat function

- Heater circuit control : SSR drive

- Sensor : K thermocouple (for temperature control, for independent overheating protector)

- Safety device : Self-diagnosis function (temperature sensor abnormality, heater disconnection, SSR short circuit, memory abnormality, internal communication abnormality, temperature input circuit abnormality,

- Safety device : automatic overheating prevention function), overheating prevention device, overcurrent leakage breaker

- Shelf plate load : Approx. 15kg / pcs.

- Shelf support step number / pitch : 9 steps / 30mm

- Shelf plate / Shelf bracket : Stainless punching metal, 2 pcs. / 4 pcs.

- Internal dimensions（W×D×H mm） : 450×490×450mm

- External dimensions（W×D×H mm）: 560×601×820mm

"- Remarks(dimensions) : 99L"

- Power Source : Single phase AC100V 12.5A Breaker capacity and power supply equipment capacity 15A

- Weight : 48kg